|Suitable For||Bathroom, Indoor, Kitchen, Living|
Schlüter-DITRA matting is an uncoupling and waterproofing. Schlüter-DITRA should always be used with Plywood overlay floors in order to inhibit the transference of lateral movement through to tile coverings.
Can be used to overlay screeds that have not had sufficient time to cure properly.
When used in conjunction with Schlüter-KERDI 200 matting, Schlüter-KERDI-KEBA Tape & Schlüter-KERDI-COLL Sealant Adhesive, forms part of a complete waterproofing solution for wet room and stone showertray installations.
NB. Tiles should be a minimum of 50x50mm when fitting on top of Schlüter-DITRA matting. Adhesive bed thickness should not exceed 10mm on top of Schlüter-DITRA matting.
Please click here for full Schlüter-DITRA data sheet or view our guide to installing wet rooms and natural stone showertrays.
Please contact us for large enquiries or bulk purchases.
Uncoupling: Schlüter-DITRA uncouples the floor covering from the substrate and therefore prevents any lateral movement within the substrate, transferring through to the tile covering and potentially causing cracks. Waterproofing: Schlüter-DITRA is a waterproof membrane, which when combined with Schlüter-KERDI 200, Schlüter-KERDI-KEBA Tape & Schlüter-KERDI-COLL can be used to create a waterproof assembly, protecting the underlying substrate against damage due to moisture. Equalisation of vapour pressure: The interconnected air channels between the cavities on the underside of the Schlüter-DITRA matting remain open. This allows moisture in the substrate to evaporate, therefore neutralising vapour pressure.
Download Product Specification
T: +44 (0)1600 715444 F: +44(0)1600 715494 E: email@example.com