This material should be ‘slurry’ grouted on installation
When laying products in a Bella Opus pattern, the grout gap between tiles will vary. Dry lay a few modules before tiling commences in order to ascertain the optimum spacing. This variation is lost when the tiles are laid and grouted.
Due to the way that it is formed, travertine tile has voids present throughout the stone. It is not unusual for voids which are just below the surface to open up through everyday wear and tear. These voids can be filled with either grout or a suitable resin, which is available in kit form.
- Low to Medium Traffic
- Worn Edge Finish
Norcros Wide Joint Flexible Wall & Floor Grout
Norcros Standard Set Flex S1 White Wall & Floor Adhesive
Norcros Rapid Flex S1 White Wall & Floor Adhesive
Fila Satin | Satin Surface Sealant
Fila Fob | Base Sealant
Fila Cleaner | Everyday Detergent
T: +44 (0)1600 715444 F: +44(0)1600 715494 E: firstname.lastname@example.org